Page 1 of 1
0.40 Pathfinding error
Posted: Sun Feb 24, 2013 4:21 am
by Bruno
After I built a wall around my 'base', my workers will no longer operate the stone processor or the stone mine. They will just walk outside of the base or open the gate if it's closed. Doesn't matter how close to the machines they are.
Re: 0.40 Pathfinding error
Posted: Sun Feb 24, 2013 4:45 am
by Ardanza
Bruno, is the stone processor or stone mine full? (maximum 5 items i believe) look at the output and see if there are items in it.
After doing this, also just right click on the processor to let them work, if they start running to the gate to unlock/open it let them, they will run back and continue working. Units don't seem to like working when the doors are locked....
Re: 0.40 Pathfinding error
Posted: Sun Feb 24, 2013 4:49 am
by Bruno
Neither is full, and when empty they used to take what they needed from the other. When I added walls nearby, it seemed to ruin the building. If the gate is locked the first time I order them to operate either machine, they will go open the gate. The second time, they will walk out of the gate and stand on the other end of the wall near the machines.